CONCRETE MATURITY MONITORING SYSTEM
Download the HardTrack
Concrete Maturity Brochure
(pdf file)
NEW!!
DOWNLOAD
Hard Track Brochure V2
Our Concrete Maturity Monitoring System uses RFID (Radio Frequency Identification) which allows you to receive the in-situ temperature of the concrete wirelessly. You will actually be able to read the temperature data right through the concrete!
Fifty years ago,  engineers discovered the many advantages "Concrete Maturity" had over the destructive process of measuring the strength of the concrete.
However, because there were so many problems inherent in the capture of in-situ temperatures using sensors and wires, "Concrete Maturity" has been slow in being accepted.
Fifty years later, many are still measuring concrete maturity the old fashioned way by burying various types of temperature sensors in the concrete, then stringing wire out to the edge of the concrete, then hooking up some type of device to read the temperatures. This often ends up in frustration because of the difficult process of stringing the wires, then discovering later on that one or more wires was broken either internally or externally.
Today, using wires for concrete maturity data is out of date and not the best way!  Now you can have RFID with built in temperature logger and no more broken wires!  You will be amazed at how simple wireless concrete maturity using RFID has become!

                        * Bury the RFID tag.
                        * Cover it with concrete.
                        * Let the RFID tag collect the temperature data.
                        * Retrieve the data as frequently as you wish to.
                        * Nothing to hook up!


Compared to the destructive method where you break the cyclinders or beams, concrete maturity is:

                        * Easier        * Safer
                        * Faster        * More Reliable
This engineer is receiving his concrete maturity temperature while sitting in his truck at the side of the road.
Learn more about the components - Concrete Maturity Monitoring System (using RFID instead of wires)...

See our RFID Section - WAKE, Inc. specializes in automating data capture. Now we can assist you in capturing your data.

Introduction to Concrete Maturity - a detailed guide to using RFID to provide accurate concrete maturity data.

Concrete Maturity Testing in Michigan - February 2004 by Andrew J. DeFinis P.E. A white paper on Wireless Concrete Monitoring System. (PDF file: 4.6 MB) NEW White Paper!

Concrete Solutions - Summer 2003 Edition - by Robert Risser, Jr., Executive Director of Michigan Concrete Paving Association.

Meter cuts the costs of testing new concrete - Reprint of Detroit News Article by Tom Greenwood

New Technology Puts Road Work in the Fast Lane - Reprint of article by David R. Miller, Associate Editor of CAM (Construction        Association of Michigan)

Maturity Meters: A Concrete Success - a reprint from the October 2002 edition of FOCUS published by the Federal Highway Administration.
An iQ32 RFID Temperature Tag
HARDTRACK is a wireless system!
Our iQ32 RFID Temperature Tag buried in the concrete
* More Accurate
* Less Expensive
Download the White Paper on Concrete Maturity by Will Hansen, Ph.D. (pdf file)
NEW!!
DOWNLOAD
Download the
RFID Cures Concrete article (pdf file)
NEW!!
DOWNLOAD
Click to download the article
Click to download the White Paper